Wanted: BMX bits, two pegs and one U Brake + brake plate - London Fixed-gear and Single-speed

TheBrick(Tommy) · 14th August 2008

Need a front brake, brake plate and gyro / oryg. Any BMXers got any lying around.

mooks · 14th August 2008

I've got a set of Demolition pegs on eBay at the moment (just search 'Demolition BMX pegs') which end over the weekend, but I do have a set of pretty manky T1 pegs in my toolbox at home. Both smooth, but the Demolition ones are in much better condition.

Happy for you to have the others (as long as I didn't chuck them out during a recent clearout) for postage, otherwise feel free to have a look at the ones on eBay - they're going cheap and can't see them going for more than a fiver, and I'd waive postage on those 'because it's you'.

Unfortunately I chucked out a silver AD990 over the weekend. The springs were a little dodgy, but I couldn't see myself needing them. Bugger - sorry about that.

TheBrick(Tommy) · 14th August 2008

Ta buddy I'll have a bid on the pegs and see how they go. I am just yearning to go back to four pegs and a front brake as it was how I always rode before. Just need the bits.

I'd also like to add a WANTED for a brake plate to my list. If anyone has one lying around unloved let me know.

mooks · 14th August 2008

Pah - just do footjam nosepicks. It's what all the cool kids do. Always made me wonder why - if you're going to do front wheel stuff just get a brake - how much more skillful is it supposed to be ramming your foot against the tyre to stop?

TheBrick(Tommy) · 14th August 2008

Quote:

Originally Posted by mooks

Pah - just do footjam nosepicks. It's what all the cool kids do. Always made me wonder why - if you're going to do front wheel stuff just get a brake - how much more skillful is it supposed to be ramming your foot against the tyre to stop?

Not that I can nose pick at all consistently but I find a foot jam is easier to "pop" back out of but you can loose your toe nail if you mess up and it's still alot harder to do many thing without a front brake.

I'm shit but I had just about learnt how to do 360 endo / nose wheelie on a flat bank with a brake and they felt well nice so thats what I want it for, stuff like that. I only play at BMX after all.

Though all the front brake doubters should check out Rob Ridge. Makes me want to get a free coaster too.

http://www.youtube.com/watch?v=yECoubyb3dY

teenslain · 14th August 2008

I need some cheap black 10mm pegs, if anyone's got some lying around... They're for my lady's bike (which, incidentally, she never rides)...

Object · 14th August 2008

Tommy, it's done. Sunday is finished.
We need a date for some BMX action.

Cooch · 14th August 2008

some pegs here if your still interested

http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=370074767711

TheBrick(Tommy) · 14th August 2008

Quote:

Originally Posted by Object

Tommy, it's done. Sunday is finished.
We need a date for some BMX action.

Not next week but maybe the week after one evening.

Quote:

Originally Posted by Cooch

some pegs here if your still interested

http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=370074767711

Thanks but they're not socket pegs or smooth.

Object · 14th August 2008

Hit me up when you know you'll be free.

deadly fanny pack · 14th August 2008

I have a Rear brake and an unused plate.

The brake is spare, but I had been thinking of using the plate at somepoint so shall want some monies.

Alternativeley, get yourself a pair of forks with ad lugs on it.

TheBrick(Tommy) · 14th August 2008

I'm happy to pay for the plate + brake. Rear brake is fine too. I've always modded my brakes anyway. Don't suppose you have a RH lever too?

Conan · 14th August 2008

To hijack this thread slightly. If anyone has a 33t sprocket or some bmx bars that arent cut down too much kickin it id be interested in em. Thanks Guys.

pete · 14th August 2008

Quote:

Originally Posted by TheBrick(Tommy)

Ta buddy I'll have a bid on the pegs and see how they go. I am just yearning to go back to four pegs and a front brake as it was how I always rode before. Just need the bits.

I'd also like to add a WANTED for a break plate to my list. If anyone has one lying around unloved let me know.

man.. sorry.. i threw away the front brake that came with the bike :(

deadly fanny pack · 14th August 2008

I have two pairs of bars, both fairly wide but cut a little. And one uncut.

One is a pair of 4pc bars which I had powder coated teal/turquoise kida colour then never used since.

Next, a pair of Odyssey 41thermal MILK bars in Chrome, which I used for a week from new.

Last, is a pair of black commencal village bars, uncut.

Im not in london, so any would have to be posted or I could pop down if something fun is happening.

I also have a various other bmx bits to offload. pair of gsport/supra-e wheels in newish cond.

A single rear gsport/supra-e wheel well used. All run on 16t freewheels.

A 14mm, 48h rear hub with brand new 14t ACS freewheel fitted.

Loads of maxxis dirt tyres.

Pair of tektro pre bent levers (rather nice ones!)

A pair of new Modulevers.

A tektro rear brake,

a Dia-compe rear brake.

A pair of white mag wheels used once for jokes.

A brand new boxed set of Primo Hollowbite cranks.

and more more more!

I really need to get this stuff together and make a sale.

TheBrick(Tommy) · 14th August 2008

As I said defiantly interested if you have the brake plate you mentioned.

mooks · 15th August 2008

Just checked in the shed and I do have another set of pegs in case the eBay ones don't come through. They're not T1 but Snafu (they have a barcode on them so assumed they were...). Bit dented around the ends, but they'd do the job. These ones have a bolt shape to the mounting side so you can rotate them when bits start to wear down - and it stops them from twisting when you're grinding.

capperz · 28th August 2008

i have a tektro brake set and lever off my old fit am if u r still lookin

capperz · 28th August 2008

Quote:

Originally Posted by deadly fanny pack

I have two pairs of bars, both fairly wide but cut a little. And one uncut.

One is a pair of 4pc bars which I had powder coated teal/turquoise kida colour then never used since.

Next, a pair of Odyssey 41thermal MILK bars in Chrome, which I used for a week from new.

Last, is a pair of black commencal village bars, uncut.

Im not in london, so any would have to be posted or I could pop down if something fun is happening.

I also have a various other bmx bits to offload. pair of gsport/supra-e wheels in newish cond.

A single rear gsport/supra-e wheel well used. All run on 16t freewheels.

A 14mm, 48h rear hub with brand new 14t ACS freewheel fitted.

Loads of maxxis dirt tyres.

Pair of tektro pre bent levers (rather nice ones!)

A pair of new Modulevers.

A tektro rear brake,

a Dia-compe rear brake.

A pair of white mag wheels used once for jokes.

A brand new boxed set of Primo Hollowbite cranks.

and more more more!

I really need to get this stuff together and make a sale.

have u gt any pics

TheBrick(Tommy) · 28th August 2008

Brake plate as well or just brake & lever?

capperz · 3rd September 2008

just a brake and lever

TheBrick(Tommy) · 1st October 2008

Just bumping to see if anyone has any of the above brake bits lying around for cheap.

taz1badboi · 4th October 2008

hiya m8 am intrested in the maxxis tyres
wot tyres are they and are they good condition
if so would u take 8.50 posted for a pair?
write back

rocket ron · 5th October 2008

i have a white dia compe add 990 with plate if you're interested. i'm in london most days if you want to meet up. i'm off out now but will put up a pic later.

14th August 2008	#1
TheBrick(Tommy)	BMX bits, U Brake + brake plate + gyro Need a front brake, brake plate and gyro / oryg. Any BMXers got any lying around. Last edited by TheBrick(Tommy); 1st October 2008 at 14:11.. Reason: adding brake plate.
	quote reply

14th August 2008	#3
TheBrick(Tommy)	Ta buddy I'll have a bid on the pegs and see how they go. I am just yearning to go back to four pegs and a front brake as it was how I always rode before. Just need the bits. I'd also like to add a WANTED for a brake plate to my list. If anyone has one lying around unloved let me know. Last edited by TheBrick(Tommy); 14th August 2008 at 13:46.. Reason: brake
	quote reply

4th October 2008	#23
taz1badboi	maxxis tyres hiya m8 am intrested in the maxxis tyres wot tyres are they and are they good condition if so would u take 8.50 posted for a pair? write back
	quote reply

Bookmarks	Shortcuts
Digg del.icio.us StumbleUpon Facebook Reddit Google	Posts	Categories

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BMX Foot Pegs 4 MTB	lpg	Bikes & Bits	8	2nd October 2008 12:00
Fitting a BMX Brake lever on to 26.0 bars	CheBeef	Mechanics & Fixin'	16	8th August 2008 22:16
Wanted: Shimano Ultegra Brake 6600 SL front brake...	Shinscar	Classifieds & Shopping	5	5th August 2008 09:03
For Sale: 2 x Deda Big Piega Drop Handlebars, Cane Creek Brake Levers, Avid Juicy 5 Disc Brake	eeehhhh	Classifieds & Shopping	5	9th July 2008 19:10
Wanted: Seat Post, Saddle, Brake Lever, Brake, Pedals	kboy	Classifieds & Shopping	12	13th January 2008 22:58

14th August 2008	#2
mooks	I've got a set of Demolition pegs on eBay at the moment (just search 'Demolition BMX pegs') which end over the weekend, but I do have a set of pretty manky T1 pegs in my toolbox at home. Both smooth, but the Demolition ones are in much better condition. Happy for you to have the others (as long as I didn't chuck them out during a recent clearout) for postage, otherwise feel free to have a look at the ones on eBay - they're going cheap and can't see them going for more than a fiver, and I'd waive postage on those 'because it's you'. Unfortunately I chucked out a silver AD990 over the weekend. The springs were a little dodgy, but I couldn't see myself needing them. Bugger - sorry about that.
	quote reply

14th August 2008	#6
teenslain	I need some cheap black 10mm pegs, if anyone's got some lying around... They're for my lady's bike (which, incidentally, she never rides)...
	quote reply

14th August 2008	#7
Object	Tommy, it's done. Sunday is finished. We need a date for some BMX action.
	quote reply

14th August 2008	#8
Cooch	some pegs here if your still interested http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=370074767711
	quote reply

14th August 2008	#11
deadly fanny pack	I have a Rear brake and an unused plate. The brake is spare, but I had been thinking of using the plate at somepoint so shall want some monies. Alternativeley, get yourself a pair of forks with ad lugs on it.
	quote reply

14th August 2008	#13
Conan	To hijack this thread slightly. If anyone has a 33t sprocket or some bmx bars that arent cut down too much kickin it id be interested in em. Thanks Guys.
	quote reply

15th August 2008	#17
mooks	Just checked in the shed and I do have another set of pegs in case the eBay ones don't come through. They're not T1 but Snafu (they have a barcode on them so assumed they were...). Bit dented around the ends, but they'd do the job. These ones have a bolt shape to the mounting side so you can rotate them when bits start to wear down - and it stops them from twisting when you're grinding.
	quote reply

28th August 2008	#18
capperz	i have a tektro brake set and lever off my old fit am if u r still lookin
	quote reply

3rd September 2008	#21
capperz	just a brake and lever
	quote reply

1st October 2008	#22
TheBrick(Tommy)	Just bumping to see if anyone has any of the above brake bits lying around for cheap.
	quote reply

5th October 2008	#24
rocket ron	i have a white dia compe add 990 with plate if you're interested. i'm in london most days if you want to meet up. i'm off out now but will put up a pic later.
	quote reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)