Wanted: Rear wheel with 126mm axle, cranks, brake lever - London Fixed-gear and Single-speed

Dammit · 14th July 2008

Converting an old Peugeot Carbolite 103 that I found in a bin.

I need:

700C rear wheel with 126mm axle (I think- correct me if I am wrong)
Front brake lever
Front brake (maybe, it has one but it's rubbish)
Cranks, rings and bottom bracket (again it has these, but they are rubbish also)
Chain, front tyre, rear sprocket (18T)

Cheers.

Dammit · 15th July 2008

Sell me stuff you bastards!

120mm hub now the shizle.

pj (pj) · 15th July 2008

you can squeeze in axle - but i have a feelign you asked this in another thread but i couldn't be bothered to read it.

erm. i strongly recommend if you're doing this on the cheap to get the FSA crankset and chainring and bottom bracket from pearsons for £39.99

pj (pj) · 15th July 2008

otherwise i can sell you the ambrosio chainring and cranks that i was using with that truvativ splined BB you helped pull out.

you'd need to find a splined, maybe octalink or whatever it is, BB.

eyebrows · 15th July 2008

bollocks, I wish I had known about that offer like 10 hours ago.

pj (pj) · 15th July 2008

oh. the FSA one? i bagged one for a conversion for a friend. cheap as shit.

eyebrows · 15th July 2008

yeah, they sure are.
fuck, oh well.

Dammit · 15th July 2008

Details please PJ?

pj (pj) · 15th July 2008

http://www.pearsoncycles.co.uk/produ..._BRACKET_OFFER

Dammit · 15th July 2008

PJ- about to purchase, cheers.

It's a 103 Carbolite Clubman- English would you think, threadwise?

pj (pj) · 15th July 2008

i'd hope so.

Dammit · 15th July 2008

Fingers crossed as I have ordered that chainset.

Dammit · 15th July 2008

Chain and front brake anyone?

pj (pj) · 22nd July 2008

i put the FSA crankset in this morning, seems fine. doesn't look amazing, i stripped the painted logo off with a kitchen knife, now better. total bargain though. i swapped out the chainring for a silver ambrosio i had lying around.

deadly fanny pack · 22nd July 2008

still need a wheel?

More details if so, I have a 32h mavic open 4CD on a miche competition hub with sachs freewheel, 126 spaced.

If you need a geared wheel, its pretty good. If you need fixed, I can build it up with one?

Dammit · 22nd July 2008

LPG was kind enough to sell me a rear wheel- I will need to space it out to 126mm though as 'tis a 120mm.
Advice on where to buy spacers would be appreciated- washers from B&Q?

14th July 2008	#1
Dammit	Rear wheel with 126mm axle, cranks, brake lever Converting an old Peugeot Carbolite 103 that I found in a bin. I need: 700C rear wheel with 126mm axle (I think- correct me if I am wrong) Front brake lever Front brake (maybe, it has one but it's rubbish) Cranks, rings and bottom bracket (again it has these, but they are rubbish also) Chain, front tyre, rear sprocket (18T) Cheers.
	quote reply

Bookmarks	Shortcuts
Digg del.icio.us StumbleUpon Facebook Reddit Google	Posts	Categories

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wanted: SS rear wheel 126mm spacing	MJC	Classifieds & Shopping	7	27th June 2008 10:15
Wanted: Any old rear wheel 126mm-130mm	smithchild	Classifieds & Shopping	1	27th May 2008 12:57
Wanted: Deep V Wheelset with 126mm or 130mm Rear Hub.	Rob M	Classifieds & Shopping	1	27th February 2008 15:12
Rear wheel for 126mm drop outs	James1822	Bikes & Bits	20	17th January 2008 12:22
Wanted: Seat Post, Saddle, Brake Lever, Brake, Pedals	kboy	Classifieds & Shopping	12	13th January 2008 22:58

15th July 2008	#2
Dammit	Sell me stuff you bastards! 120mm hub now the shizle.
	quote reply

15th July 2008	#3
pj (pj)	you can squeeze in axle - but i have a feelign you asked this in another thread but i couldn't be bothered to read it. erm. i strongly recommend if you're doing this on the cheap to get the FSA crankset and chainring and bottom bracket from pearsons for £39.99
	quote reply

15th July 2008	#5
eyebrows	bollocks, I wish I had known about that offer like 10 hours ago.
	quote reply

22nd July 2008	#14
pj (pj)	i put the FSA crankset in this morning, seems fine. doesn't look amazing, i stripped the painted logo off with a kitchen knife, now better. total bargain though. i swapped out the chainring for a silver ambrosio i had lying around.
	quote reply

22nd July 2008	#15
deadly fanny pack	still need a wheel? More details if so, I have a 32h mavic open 4CD on a miche competition hub with sachs freewheel, 126 spaced. If you need a geared wheel, its pretty good. If you need fixed, I can build it up with one?
	quote reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)