London Fixed-gear and Single-speed SJS Cycles

(so) what projects is everyone working on? anything fun?

I've recently salvaged 3 old bikes for some conversions. each very shitty, but I figure i can give them some love, and get some kids who can't afford anything that grand a decent riding SS/fixie.

The first is and old Ross touring bike. The geometry is really forgiving and the weight isn't bad. It's in for paint right now, but i forgot to snap a before picture.

The second is a ladies scwhinn. it was heavy as fuck, but dropping teh old steel wheels and derailleurs really lightened it up quite a bit. it's been being ridden for a while now, though technically its still in progress. It's also going to paint this week.

the final one is kind of an epic piece for me. it's a yellow piece of shit scwhin. it weighs 23 lbs with out wheels. seriously a piece of shit. i was made fun of at work for even touching it. i'm taking my time with it, and really trying to make this something nice. though it will always be a shoddy frame, at least it will ride nice and look hot. spending way more money and time on it than it's worth, but it's all about showing up the guys at work.

i will post some before and afters of what i got this week sometime.

(also any ideas to really get a shitty bike looking trick would be apreciated. i tend to make a lot of them look the same.)

this, 1955 holdsworth zephyr path/track:


and soon, this, another holdsworth, which i just bought for £147 because i really really think it's a track/path frame in disguise:

I've got a Fort lo pro that's getting the slave treatment... picked up a carbon 650 front wheel for £60 last week. Can't wait to get it finished...

can't wait to see it, shame about the MKM.

im working on this
http://www.londonfgss.com/members173...picture320.jpg
and this
http://www.londonfgss.com/members173...picture292.jpg

i've got a major HHSB build on the way. got most of the bits, just waiting for the frame/forks to be built and my profile hubs sent over. ah, the wait is killing me :(

that colnago is ready to ride!

You'll see.
It is going to beat dales though.
:)


Edit: currently looking for something to fill the waiting time up, so 2 projects. Plus the rebuild of the speedway bike to make it fixed. Plus helping out a few friends. Plus making a fixed for my gf.

care to wager! :p

i want a colnago!

dale- i got 40 hole hub coming this week. can you rebuild wheel for me? i buy you carrot juice.

I think that I just got outslaved by russell...

Hmm, back to the drawing board...

:p

no problem :)

And, the Colnago is ready to ride...

the colnago needs a bit of tidying up

i'll try and get a non-carbon Italian rear wheel

I got talking to a mate of mine about bikes this weekend. Turns out his dad had bought himself a racer about 20 years ago in switzerland, NEVER rode it, brought it back home and it's hung in his garage ever since.

It's an MBK road bike, steel, full 105 groupset, not a mark on it.. looks like the type of thing you'd wake up on christmas day for. A shiny, bright red racing bike. Made me feel a bit funny.

Needless to say, it's sat down my cellar now.. no puppies will be harmed, I plan on washing my gloves before I ride it so the original bar tape doesn't get marked..

not really a project bike, but I had to tell someone..

Got two project on the go. An affinity Lo-pro (Hopefully it'll be finished this weekend) and a Sunday BMX, likely by the end of this month.

I'm toying with a few ideas for the next build(s) but suspect I'm going to delay those for a while whilst I purchase a decent kneebrace and save some pennies for my right sleeve.

Shit looks like everyone has got a Lo-pro in the cooker !

Me ?

I am working on getting the Tommasini lo-pro I bought from Jon up and going.

They will, of course, be slavery, perhaps even electronic beyong slavery.

^ hhslp

I'm getting the raleigh tank back on the road, I've done all the frame repairs/alterations:

http://www.londonfgss.com/thread4000.html

Just needs a coat of black paint, I have a rear wheel built, black rigida SX100 on black formula hub, black ACI spokes (seeing a trend here) and gold spoke nipples, just needs truing and the front building. bars will be nitto 123s covered in black leather full length and the saddle will be a brooks.

Damnit, lo-pro overdosage..
I've had my lo-pro frame sitting about for two years and just getting round to building it up.. along with THE REST OF YOU!
On the bright side, I did pick it up when you could buy a sweet italian curvy frame for £40 on the bay, and a 650 wheel for a fiver.. and it'll probably be the only one in B'town.

Got two projects on the go at the moment - very old Mercian conversion, which will eventually become my main bike once I get hold of the 120mm wheels and a 27.0mm seatpost. Bit of an odd one really - no braze-ons or cable routing, but it's drilled for a rear brake. If the braze-ons have been removed (i.e. if there were any on there to begin with), it's been done very well, and resprayed by Mercian in the meantime. It'll never run as a geared again that's for sure. I'll post photos later - I'd appreciate it if anyone can tell me whether I should get it resprayed or just leave it as is.

My other project is my geared bike - a late model Holdsworth professional. Going to have the downtube shifter bosses removed, get ergo guides added and have it sprayed up in gunmetal grey with ivory lugwork and maybe an ivory headtube if my budget can stretch to it. Got a shed full of Campag Veloce and Chorus stuff, along with a set of Khamsin wheels. Going to be odd riding a freewheel again - why can't they make a fixed geared bike?

I'm saying nothing about my build.
It will be unique.

c'mon, put your money where your mouth is!!

my money is where my bike is!
:P
and we can have a fashion show when both bikes are ready, sound fair?
get all the HHSBs built over summer involved.

an old allins the stan butler special model nice old 531 tubed bit of classic brit
may make it to polo this very weekend low geared and raring to go

who? holdsworth?

hahahaha

victims. fucking lo-pro bullshit.

what a fixed gear bike like:
http://bp1.blogger.com/_6G8f4ofis4k/...h/IMG_0890.JPG

No "Them".

totally sick helmet.

hehe, I also have a lo-pro project on the go...some of you may have seen it; was that Roberts that Roberto was selling a while back...

haha another sucker.

don't forget to put a million spacers on it and steep riser bars.

Do you think it is fair to laugh at the victims of hop hop bike slavery ?

Like the Zoolander 'walk off' ?

Shit, he is on to us. :(

Looks like there is going to be run on 650's.

Sweet

ha! get 700s you poserengers.

I'm working on a GT Lobo STS and have been for the last year or so and a my first fixed which will be a Bob Jackson.

That's the ticket - sort of explains why they can't make fixed geared bikes - no opposable thumbs.

I have just picked up this little beauty. But I aint got a clue what to do with it yet s its my first attempt. Will be hassling people for help very soon no doubt ;)

the search function on here is bloody good mike. :p

convert it to horizontal dropouts?

Ah Mike - I gave some serious thought to getting that off Roberto. Glad it went to a good home.

Dang we've got similarly good taste in bikes.

cotic road rats, you got to be kidding. vomit!!!

I'm working on a shitty Reynolds 500 LoPro (one more;) that's going to be running a low-grade 9-speed Campagnolo group.. have a shitty worn Shamal i'm going to put in back and i don't have any decent 650 front-wheel for it yet.. so i guess I'm just going to use the original 36-spoke wheel..

And I'm waiting for a new (track) frame I ordered for my daily everyday-bike. And looking for a cheap/used shiny deep rim for it's rear wheel that'll match up fairly well with the Shamal I'm going to use in the front.. otherwise not doing anything special.. :)

I'm not the only one finding it annoying that track Shamal's are kind of hard to get? :)

I am building a slave stable:

06 Langster - this will be my cheap dirty little whore of a slave bike

Condor Lavoro - this will be my high class escort slave bike

SS Carbon MTB - this is my HHSMTB, for when a momgolian clusterfuck of a ride is on the horizon

Yet to be bought classic frame - still searching for the right frame, this bike will be my slave free wife of a bike, with no slavery in sight

Oi you closet Roadie - quiet! I still haven't consumed enough alcohol to get your FDJ kit out of my head.