Notices

 
LinkBack Thread Tools Search this Thread
Old 8th April 2008   #1
bigcoggs
 
bigcoggs's Avatar
Noisy f@@king Langster 06 chain!

I recently upgraded my chain from an old KMC Z-510HX to a izumi eco and ever since i have had a stupid amount of chain noise. Before my ride was ultra quite? I've tried shed loads of oil, different tensions...nothing seems to work. Both chains are 1/2 1/8 and all the components on my bike are 1/8..any ideas????
  quote   reply
Old 8th April 2008   #2
pilky
new chain might need just a bit of time to bed in with old cogs, they will have worn with the old chain
  quote   reply
Old 8th April 2008   #3
bigcoggs
 
bigcoggs's Avatar
Pilky, thanks for the reply..the chains been on for about 10 weeks!
  quote   reply
Old 8th April 2008   #4
pilky
... oh
  quote   reply
Old 8th April 2008   #5
*FRANKdonor
 
*FRANK's Avatar
I have a similar problem on my iro running an izumi super toughness, its been making a racket for weeks now and shows no sign of stopping.
  quote   reply
Old 8th April 2008   #6
flickwg
 
flickwg's Avatar
izumi chains are loud

my guess, try to remove all the grease as well as possible as my izumi chain had this sticky grease on it in the first place, re lube and see if it is quieter

there are other threads about loud izumis

also the title of the thread is wrong, since the chain is new the bike is somewhat irrelevant from whether or not it is a noisy chain
  quote   reply
Old 8th April 2008   #7
hippydonor
 
hippy's Avatar
Swap cog and chain at the same time or use different chain.
Wear earmuffs.
  quote   reply
Old 8th April 2008   #8
bigcoggs
 
bigcoggs's Avatar
Flickwg, thanks for the tips. I only put Langster in the title as i thought someone might suggest something to do with chain lines and thought it might be relevant. Think i might find a different chain...any recommendations..preferable a quite one!
  quote   reply
Old 9th April 2008   #9
flickwg
 
flickwg's Avatar
kmc are the standard chain and they were quiet for me

halflink bmx chain
  quote   reply
Old 9th April 2008   #10
dogsballs
 
dogsballs's Avatar
Quote:
Originally Posted by flickwg View Post
izumi chains are loud

my guess, try to remove all the grease as well as possible as my izumi chain had this sticky grease on it in the first place, re lube and see if it is quieter

there are other threads about loud izumis

also the title of the thread is wrong, since the chain is new the bike is somewhat irrelevant from whether or not it is a noisy chain
never never wipe off factory chainlube, i find this is the bestest stuff and tends to last the longest.

KMC i find are usually loud, although my new izumi is still too new to notice.
  quote   reply
Old 9th April 2008   #11
eyebrowsdonor
 
eyebrows's Avatar
My KMC/ surly combo is disturbingly quiet.
  quote   reply
Old 9th April 2008   #12
Velociodonor
 
Velocio's Avatar
I'm switching to 3/32 for the next build... too much freaking noise.
  quote   reply
Old 9th April 2008   #13
dogsballs
 
dogsballs's Avatar
Quote:
Originally Posted by VelocityBoy View Post
I'm switching to 3/32 for the next build... too much freaking noise.
turn your hearing aid down! :p
  quote   reply
Old 9th April 2008   #14
Velociodonor
 
Velocio's Avatar
I'm practically deaf and with no hearing aid... and it still sounds like a tractor.
  quote   reply
Old 9th April 2008   #15
dogsballs
 
dogsballs's Avatar
what did you say?
  quote   reply
Old 9th April 2008   #16
Velociodonor
 
Velocio's Avatar
Ah, you're deaf too. Splendid. Then we can sit in the corner at the bar and grunt at each other safe in the knowledge that we could never say anything out of place as we wouldn't be able to hear each other.
  quote   reply
Old 9th April 2008   #17
31t®umdonor
 
31t®um's Avatar
i might as well join you two then.
izumi's are noisey full stop!
  quote   reply
Old 9th April 2008   #18
bracestower
As Hippy says, you should get a new cog if you're changing chain. I've had this happen to me before and the chain made a fucking racket. New cog and viola! Silent (ish - it's also an Izumi chain).

Though, I think the silence thing is overrated anyway.
  quote   reply
Old 9th April 2008   #19
bigcoggs
 
bigcoggs's Avatar
Would rather not replace my cog as i splashed out on a E.A.I superstar. Think i might just go for a hkk vertex chain although i have an old spare nickel plated chain i could use......whats the benefit of nickel plating?
  quote   reply
Old 9th April 2008   #20
flickwg
 
flickwg's Avatar
nickel plating = harder wearing
  quote   reply

Bookmarks Shortcuts
Posts Categories

Tags
chain, noisy


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Chris King headsets Stef Bikes & Bits 9 19th April 2009 19:57
For Sale: Chris King Headsets (Black or Pink) Object Classifieds & Shopping 17 18th May 2008 17:09
Chris King: Gripnut or 2nut? fc9k Bikes & Bits 8 11th March 2008 11:04
I've done a stupid Chris King thing HELP ME chris crash Mechanics & Fixin' 31 5th February 2008 22:55
Is Hippy the King of Thailand? SimonC Miscellaneous & Meaningless 1 30th November 2007 14:15

Creative Commons License All times are GMT. The time now is 05:54.
no new posts
Page generated in 0.18401 seconds with 8 queries