Miche 20t 3/32? - London Fixed-gear and Single-speed

silver · 25th October 2007

anyone has any idea where i can find the above - do they even exist?

edmundane · 25th October 2007

i'm quite sure miche only do 1/8th and up to 18t

silver · 25th October 2007

they do 3/32....but the largest i found was 19t.

dogsballs · 25th October 2007

does it have to be miche? roland posted a link to the GTED site that had big sprockets, maybe try hubjub as well.

silver · 25th October 2007

i wanted miche because i like their easy removal system - which means i don't need to buy a chainwhip.

eyebrows · 25th October 2007

rotafix??

edmundane · 26th October 2007

thing about miche is it's actually italian threaded, the cog will go on, but you risk the threads. few people i heard have done it without probs but just make sure you don't swap the lockring for something else.

architectom · 26th October 2007

try universal cycles, it will be coming from half way around the world, but if you enter vip10, you get 10% off over 100usd, and vip15 gets you 15% off 300usd+ they have a variety of miche things, also glory cycles may have them. sounds like time to go to 1/8".

architectom · 26th October 2007

or take a weekend trip to italy and buy them there.

Bookmarks	Shortcuts
Digg del.icio.us StumbleUpon Facebook Reddit Google	Posts	Categories

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Miche BB Question..	Ridgy	Mechanics & Fixin'	5	28th February 2008 16:38
Miche Primato Crank! Do I or don't I?	BoBoB	Bikes & Bits	18	22nd January 2008 11:20
Miche spares	JOL	Mechanics & Fixin'	7	5th December 2007 10:36
Miche bottom brackets	edmundane	Mechanics & Fixin'	16	21st November 2007 14:13
Miche cranks for under £80?	runcible rakan	Classifieds & Shopping	20	24th October 2007 21:25

25th October 2007	#1
silver	anyone has any idea where i can find the above - do they even exist?
	quote reply

25th October 2007	#4
dogsballs	does it have to be miche? roland posted a link to the GTED site that had big sprockets, maybe try hubjub as well.
	quote reply

26th October 2007	#7
edmundane	thing about miche is it's actually italian threaded, the cog will go on, but you risk the threads. few people i heard have done it without probs but just make sure you don't swap the lockring for something else.
	quote reply

26th October 2007	#8
architectom	try universal cycles, it will be coming from half way around the world, but if you enter vip10, you get 10% off over 100usd, and vip15 gets you 15% off 300usd+ they have a variety of miche things, also glory cycles may have them. sounds like time to go to 1/8".
	quote reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)